Savana 3/4 Ton Van V8-305 5.0L VIN M SFI (2001)
Windshield Washer Reservoir: Service and Repair
WASHER PUMP/RESERVOIR REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: Do not disconnect the brake lines from the master cylinder.
1. Remove the master cylinder. Refer to Master Cylinder Replacement in Hydraulic Brakes.
2. Set the master cylinder aside.
3. Remove the bolt from the washer solvent container.
4. Lift the washer solvent container up enough to access the washer hose and the electrical connector.
5. Disconnect the washer hose from the washer pump.
6. Disconnect the electrical connector from the washer pump.
7. Remove the washer solvent container from the vehicle.
