Savana 3/4 Ton Van V8-5.7L VIN R (1998)
Wheel Bearing: Service and Repair
Rear
REAR BEARING CUP REPLACEMENT
REMOVAL PROCEDURE
^
Tools Required
-
J8092 Driver Handle
-
J8608 Pinion Bearing Cup Installer
-
J24426 Outer Bearing Cup Installer
-
J24427 Inner Wheel Bearing Cup Installer
^
Axle Shaft Seal Installer
1. Raise the vehicle until the wheels are free to rotate.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
2. Remove the hub and drum.
3. Remove the oil seal (2).
4. Use a drill to remove the inner bearing and the cup (1).
5. Use snap ring pliers to remove the retaining ring (11).
6. Remove the outer bearing ring using J24426 and J8092.