gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Marker Lamp Replacement - Side 1|Page 9462 > < Park, Tail and Marker Lamps (Domestic)|Page 9459
Page 1
background image

Marker Lamp: Service and Repair
Marker Lamp Replacement - Side 1

REMOVAL PROCEDURE

1. Remove the screw (4) that retains the front side marker lamp to the radiator grille.
2. Lift the side marker lamp (3) up and out in order to disengage the tab.
3. Disconnect the bulb socket (1) from the side marker lamp.
4. Remove the bulb (1) from the socket.

INSTALLATION PROCEDURE

1. Connect the bulb (1) into the socket.
2. Connect the bulb socket (1) into the side marker lamp.
3. Install the side marker lamp (3) to the radiator grille (5).

NOTE:  Refer to Fastener Notice in Service Precautions.

4. Install the side marker lamp retaining screw (4).

Tighten
Tighten the screws to 1.5 N.m (13 lb in).

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID".  
See: Application and ID/RPO Codes

Marker Lamp Replacement - Side 1|Page 9462 > < Park, Tail and Marker Lamps (Domestic)|Page 9459