Savana 3/4 Ton Van V8-6.5L DSL Turbo VIN F (2001)
-
Tighten the J 29193 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
6. Remove the J 29193.
7. Install the new prevailing torque nut (3) to the ball stud.
-
Tighten the nut to 47 Nm (35 ft. lbs.).
8. Install the grease fitting, if equipped.
Grease the steering linkage.
9. Remove the safety stands.
10. Lower the vehicle.
11. Check the wheel alignment.
