Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Fuel Rail: Service and Repair
Fuel Rail Assembly Replacement
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Remove the air cleaner resonator outlet duct.
3. Before removal, if necessary, clean the fuel rail assembly with a spray type engine cleaner, use GM X-30A or equivalent. Follow the package
instructions. Do not soak fuel rail assembly in any liquid cleaning solvent.
IMPORTANT: An eight-digit identification number (1) is located on the fuel rail assembly. Refer to this model identification number if servicing or
part replacement is required.
4. Disconnect the accelerator control cable and the cruise control cable from the cable bracket, if equipped.
5. Disconnect the cruise control cable engine-end fitting from the stud on the throttle lever, if equipped.