Savana 3/4 Ton Van AWD V8-5.3L VIN T (2003)
Installation Procedure
1. Install the idler arm to the frame.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the idler arm to frame mounting bolts.
Tighten the bolts to 150 Nm (111 ft. lbs.).
3. Install the idler arm to the relay rod.
4. Install the new idler arm to relay rod retaining nut.
Tighten the nut to 63 Nm (47 ft. lbs.).
5. Lower the vehicle.
6. Check the wheel alignment.