gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Keyless Entry - Transmitter Button Inop/Won't Program|Page 9244 > < Keyless Entry Receiver|Diagrams
Page 1
background image

Keyless Entry Transmitter: Technical Service Bulletins
Keyless Entry - Transmitter Button Inop/Won't Program

INFORMATION

Bulletin No.: 10-08-52-003

Date: July 21, 2010

Subject: Remote Keyless Entry Transmitter (RKE) Button Inoperative or Will Not Reprogram to Vehicle

Models:

2006-2008 Buick Allure/LaCrosse
2006-2010 Buick Lucerne
2008-2010 Buick Enclave
2006-2007 Cadillac SRX
2006-2009 Cadillac DTS
2008-2009 Cadillac CTS (Non-EZ Key), Escalade, Escalade ESV, Escalade EXT
2006-2010 Chevrolet Impala
2007-2009 Chevrolet Equinox
2007-2010 Chevrolet Avalanche, Silverado, Tahoe, Suburban
2008-2010 Chevrolet Express
2009-2010 Chevrolet Captiva
2007-2010 GMC Acadia, Sierra, Yukon, Yukon XL (Including Denali Models)
2008-2010 GMC Savana
2007-2009 Pontiac Torrent
2007-2010 Saturn OUTLOOK
2008-2010 Saturn VUE
2008-2010 HUMMER H2, H2 SUT
with Remote Keyless Entry

Attention:

This bulletin should be distributed and reviewed by the Service Manager and Service Advisors. A copy of this bulletin may be given to your customer to
assist in explaining the remote keyless entry (RKE) transmitter operation.

This bulletin provides information regarding any remote keyless entry/transmitter (key fob) that may be inoperative intermittently or in which a particular
button(s) does not work.

To prevent transmitter battery drain, the RKE transmitter will disable any button or buttons that are depressed longer than 30 seconds. The disabled
button or buttons will remain disabled until another button that has not been disabled is pressed. 

If a button or buttons on a transmitter are not functioning, or if a transmitter cannot be programmed to a vehicle, press and release each and every button
on the fob one at a time until you find one that works then retest the other buttons. If all buttons are now working, the button(s) were disabled and the
transmitter is working as designed.

If the transmitter still fails to function properly, use the J-43241 tester and follow normal diagnostics as shown in SI.

Disclaimer

Keyless Entry - Transmitter Button Inop/Won't Program|Page 9244 > < Keyless Entry Receiver|Diagrams