Savana 3500 V8-4.8L (2009)
2. Connect the electrical connectors (2) to the BCM (1).
3. Install the right side knee bolster trim panel. Refer to Passenger Knee Bolster Replacement (See: Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair).
4. If you replaced the BCM, program the module. Refer to Body Control Module Programming and Setup (See: Testing and
Inspection/Programming and Relearning).
5. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning) for programming and setup information.