Savana 3500 V8-4.8L (2009)
6. Remove the seat cushion from the seat adjuster assembly (4).
1. Remove the recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver or Passenger
Seat Recliner Handle Replacement).
2. Remove the power seat adjuster switch, if equipped. Refer to Power Seat Switch Replacement (See: Power Seat Switch/Service and Repair).
3. Remove the bolts securing the seat cushion frame (3) to the adjuster assembly (4).
7. Release the seat cushion J channel retainers from the seat cushion frame.
8. Release the hook and loop strips that retain the seat cushion cover (1) to the seat cushion pad (2).
9. Remove the seat cushion cover from the foam pad.
10. Remove the foam pad (2) from the cushion frame (3).
Warning
Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are
assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger presence system to operate improperly.
11. If replacing the front passenger seat cushion pad, you must also replace the inflatable restraint passenger presence system. Refer to Inflatable
Restraint Passenger Presence System Replacement - Front (See: Restraint Systems/Air Bag Systems/Seat Occupant Sensor/Service and Repair).
Installation Procedure
1. When replacing a seat cushion pad (2) on a seat equipped with a power adjuster, remove the perforated section (9) on the front of the cushion pad
(2).
2. Position the foam pad (2) to the seat cushion frame (3).
3. Position the seat cushion cover (1) to the foam pad (2).
4. Engage the J channel retainers to secure the seat cushion cover (1) to the seat cushion frame (3).
5. When replacing a seat cushion cover on a seat equipped with a power seat adjuster proceed with the following steps:
