Savana 3500 V8-4.8L (2009)
3. Install the bolts (4) retaining the seat cushion frame to the adjuster.
4. Install the bolts (4) to retain the seat cushion frame to the adjuster and tighten to 25 Nm (18 lb ft).
5. Install the bolts (7) to retain the seat cushion frame.
6. Install the bolts (7) and tighten to 32 Nm (24 lb ft).
7. Install the seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement (See: Front Seat Cushion Cover and Pad
Replacement).
8. Install the front seat into the vehicle. Refer to Driver or Passenger Seat Replacement (See: Service and Repair/Driver or Passenger Seat
Replacement).
Warning
To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim. Failure to do so may cause
the system to malfunction.
9. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning).