Savana 3500 V8-4.8L (2009)
Front Door Weatherstrip: Service and Repair
Front Door Opening Weatherstrip Replacement
Front Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Interior Moulding / Trim/Trim Panel/Service and
Repair).
2. Remove the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair).
3. Remove the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair).
4. Remove the front door stepwell mat. Refer to Front Side Door Step Mat Replacement (See: Interior Moulding / Trim/Scuff Plate/Service and
Repair).
5. Gently pull the door opening weatherstrip from the door opening pinch-weld flange.
6. Remove the door opening weatherstrip from the vehicle.
Installation Procedure
1. Apply GM P/N 12345097 (Canadian P/N 10953479) or the equivalent, into the channel on the weatherstrip.
2. Install the weatherstrip to the vehicle.