Savana 3500 V8-4.8L (2009)
Sliding Door Window Glass Weatherstrip: Service and Repair
Sliding Door Window Weatherstrip Replacement
Removal Procedure
1. Remove the sliding side door upper trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement (See: Doors, Hood and
Trunk/Doors/Sliding Door/Sliding Door Interior Trim Panel/Service and Repair).
2. Remove the hinged body side window. Refer to Hinged Rear Window Replacement (See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Window Glass/Service and Repair/Hinged Rear Window Replacement).
3. Pull the sliding side door window weatherstrip from the window opening pinch-weld flange.
4. Remove the sliding side door window weatherstrip from the vehicle.
Installation Procedure
1. Install the sliding side door window weatherstrip to the vehicle.
2. Align the channel on the sliding side door window weatherstrip with the pinch-weld flange.
3. Press the weatherstrip into place.
4. Install the hinged body side window. Refer to Hinged Rear Window Replacement (See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Window Glass/Service and Repair/Hinged Rear Window Replacement).
5. Install the sliding side door upper trim panel. Refer to Sliding Rear Side Door Trim Panel Replacement (See: Doors, Hood and
Trunk/Doors/Sliding Door/Sliding Door Interior Trim Panel/Service and Repair).