Savana 3500 V8-4.8L (2009)
7. Remove the pinned adjusting cam insert. Do not reinstall the cam insert.
8. Loosen the upper control arm cam adjustment bolts.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
9. Adjust the caster and the camber angle by turning the cam bolts until the specifications have been met.
When the adjustments are complete, hold the cam bolt head in order to ensure the cam bolt position does not change while tightening the nut to
175 Nm (129 lb ft).
10. Verify that the caster and the camber are still within specifications. Refer to Wheel Alignment Specifications (See: Specifications).
When the caster and camber are within specifications, adjust the toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe
Adjustment (See: Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment).
