GMC Workshop Manuals
Savana 3500 V8-4.8L (2009)
Maintenance > Fuses and Circuit Breakers > Fuse Block > Component Information > Diagrams > Diagram Information and Instructions > Page 1271
5. Use a small flat-blade tool to remove TPA from the connector.
6. Use the J 38125-213 or the J 38125-556 tool to release the terminals by inserting the tool into the terminal release cavity. See the release tool cross
reference in the Reference Guide of the J-38125 to ensure that the correct release tool is used.
7. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
|[PREV PAGE] [NEXT PAGE]|