Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Maintenance > Fuses and Circuit Breakers > Fuse Block > Component Information > Diagrams > Diagram Information and Instructions > Page 1314

Page 65
background image

After the terminal is crimped to the wire, perform the following procedure in order to replace the terminal.

1. Slide the new terminal into the correct cavity at the back of the connector.
2. Push the terminal into the connector until it locks into place. The new terminal should be even with the other terminals. Ensure that the terminal is

locked in place by gently pulling on the wire.

3. Locate the terminal position assurance (TPA).

4. Use a small flat-blade tool to push the TPA until it bottoms out.

Maintenance > Fuses and Circuit Breakers > Fuse Block > Component Information > Diagrams > Diagram Information and Instructions > Page 1314

[PREV PAGE] [NEXT PAGE]