Savana 3500 V8-4.8L (2009)
Fuse Block: Service and Repair
Accessory Wiring Junction Block Replacement
Accessory Wiring Junction Block Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Press tabs (1) inward to lift and remove the small junction block cover (2).
3. Press tabs (1) inward to lift and remove the large junction block cover (2).
4. Note location and remove harness end nuts and remove harness ends from fuse block relay center.
