Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Powertrain Management > Computers and Control Systems > Information Bus > Component Information > Diagrams > Diagram Information and Instructions > Page 2777

Page 17
background image

7. Release the tabs that are holding the wiredress cover to the connector body.
8. Remove the nose piece by inserting a small flat-blade tool into the slots on both ends of the connector body. Gently pry the nose piece out of the

connector. J 38125-216 can also be used to remove the nose piece.

9. Use the J 38125-12A tool to release the terminals by lifting the terminal retaining tabs on the inside of the connector. See the release tool cross

reference in the Reference Guide of the J-38125   to ensure that the correct release tool is used.

Powertrain Management > Computers and Control Systems > Information Bus > Component Information > Diagrams > Diagram Information and Instructions > Page 2777

[PREV PAGE] [NEXT PAGE]