gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Crankshaft Position Sensor > < Engine - MIL ON P0116/P1400 Set In Very Cold Temps|Page 3053
Page 2
background image

Caution:  Refer to Component Fastener Tightening Caution   (See: Service Precautions/Vehicle Damage Warnings/Component Fastener
Tightening Caution).

2. Install the ECT sensor and tighten to 20 Nm (15 lb ft).

3. Connect the ECT sensor electrical connector.
4. Refill the engine coolant. Refer to Cooling System Draining and Filling (Static Fill)   (See: Engine, Cooling and Exhaust/Cooling System/Service

and Repair)Cooling System Draining and Filling (Vac N Fill)   (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).

Crankshaft Position Sensor > < Engine - MIL ON P0116/P1400 Set In Very Cold Temps|Page 3053