Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Service and Repair

Page 1
background image

Vehicle Speed Sensor: Service and Repair

Vehicle Speed Sensor Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the electrical connector from the speed sensor.

3. Remove the bolt.
4. Remove the speed sensor and the O-ring seal.
5. Inspect the seal and the transmission case. Replace the seal, if necessary.

Installation Procedure

1. Install the speed sensor and the O-ring seal into the transmission.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the bolt and tighten to 11 Nm (97 lb in).
3. Install the electrical connector to the speed sensor.
4. Lower the vehicle.

Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Vehicle Speed Sensor > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]