Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Powertrain Management > Transmission Control Systems > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Diagrams > Page 3726

Page 3
background image

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

3. Install the following items:

1. The actuator feed limit valve (374)
2. The actuator feed limit valve spring (375)
3. The bore plug (376)
4. The bore plug retainer (395)
5. The pressure control solenoid (377)
6. The solenoid retainer (378)
7. Tighten the pressure control solenoid retaining bolt to 11 Nm (97 lb in)

4. Connect all the internal wiring harness electrical connectors to the electrical components (1-6).
5. Install the 1-2 accumulator. Refer to Accumulator Assembly, Spacer Plate, and Gaskets   (See: Transmission and Drivetrain/Automatic

Transmission/Transaxle/Accumulator/Service and Repair/4L60-E/4L65-E/4L70-E - Automatic Transmission).

6. Install the transmission oil pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement   (See: Transmission and

Powertrain Management > Transmission Control Systems > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Diagrams > Page 3726

[PREV PAGE] [NEXT PAGE]