Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Keyless Entry Module > Component Information > Service and Repair

Page 1
background image

Keyless Entry Module: Service and Repair

Remote Control Door Lock Receiver Replacement

Removal Procedure

1. Remove the instrument panel (I/P) upper trim panel. Refer to Instrument Panel Upper Trim Pad Replacement   (See: Body and Frame/Interior

Moulding / Trim/Dashboard / Instrument Panel/Service and Repair).

2. Disconnect the electrical connector (2) from the door lock receiver (1).
3. Disengage the remote control door lock receiver (1) from the door lock receiver bracket.
4. Remove the door lock receiver.

Installation Procedure

1. Perform the following to install the door lock receiver (1) to the door lock receiver bracket.

Slide the tab on door lock receiver (1) into the door lock receiver bracket and snap into place to secure.

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Keyless Entry Module > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]