Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Locations > Page 95

Page 3
background image

2. Install new EBCM bolts (1).

Tighten the bolts in a cross pattern to  3 Nm (27 lb in).

3. Connect the electrical connector to the EBCM.
4. Install the brake modulator shield and the mounting nuts, if equipped, and tighten to  25 Nm (18 lb ft).
5. Install the brake modulator shield mounting bolt and tighten to  25 Nm (18 lb ft).
6. Lower the vehicle.
7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection   (See: Starting and Charging/Battery/Battery

Cable/Service and Repair).

8. Refer to Control Module References   (See: Testing and Inspection/Programming and Relearning) for programming and setup information.

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Locations > Page 95

[PREV PAGE] [NEXT PAGE]