Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Service and Repair > Inflatable Restraint Front End Sensor Replacement > Page 707

Page 2
background image

3. Install the inflatable restraint front end sensor (1) into the keyhole slot in lower radiator support (2). 

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

4. Push the sensor towards the rear of the vehicle to seat the sensor in the keyhole slot in the lower radiator support (2). Tighten the nut (1) to 10 Nm

(89 lb in).

5. Connect the inflatable restraint front end sensor electrical connector.
6. Install the CPA to the electrical connector.
7. Remove the safety stands and lower the vehicle.
8. Enable the SIR system. Refer to SIR Disabling and Enabling   (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air

Bag(s) Arming and Disarming/Service and Repair).

Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Service and Repair > Inflatable Restraint Front End Sensor Replacement > Page 707

[PREV PAGE] [NEXT PAGE]