GMC Workshop Manuals
Savana 3500 V8-4.8L (2009)
Transmission and Drivetrain > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Torque Converter Clutch Solenoid, A/T > Component Information > Diagrams > Diagram Information and Instructions > Page 4317
7. Using terminal release tool J-38125-221, press the prongs into the holes on each side of the terminal to be removed to release the lock tabs and
pull the terminal out of the connector body.
8. The female connector body may have an additional connector hooked to the edge of the body. Use terminal release tool J-38125-11A or equivalent
to release the locking tab and slide the connector off the female body.
|[PREV PAGE] [NEXT PAGE]|