Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Torque Converter Clutch Solenoid, A/T > Component Information > Diagrams > Diagram Information and Instructions > Page 4637

Page 39
background image

3. Depress the spring loaded locator of the crimping tool until the terminal holder is completely visible.

4. Insert terminal into the appropriate terminal holder until it hits bottom and stops. The correct terminal holder is determined by the wire size. Also

ensure that the terminals wings are pointing towards the former on the tool and the release locator.

5. Insert the stripped cable into the terminal. Insulation should be visible on both sides of the terminal insulation wings.
6. Compress the handles until the ratchet automatically releases.
7. Place the terminal into the appropriate cavity and assemble the connector.

Delphi Connectors (Micro-Pack 100W)

Delphi Connectors (Micro-Pack 100W)

Tools Required

J-38125  Terminal Repair Kit

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Torque Converter Clutch Solenoid, A/T > Component Information > Diagrams > Diagram Information and Instructions > Page 4637

[PREV PAGE] [NEXT PAGE]