Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Torque Converter Clutch Solenoid, A/T > Component Information > Diagrams > Diagram Information and Instructions > Page 4679

Page 81
background image

6. Use the J 38125-12A tool to release the terminals by pressing on the tang. See the release tool cross reference in the Reference Guide of the

J-38125   to ensure that the correct release tool is used.

7. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a

terminal out of a connector.

Repair Procedure

Use the appropriate terminal and follow the instructions in the J-38125  . 

Location of the terminal in the repair tray and the proper crimp tool can be found in the appropriate connector end view.

Tyco/AMP Connectors (Seat)

Tyco/AMP Connectors (Seat)

Special Tools

J-38125  Terminal Repair Kit

Removal Procedure

1. Grasp the locking slide lever and pull outward from the end of the connector.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Torque Converter Clutch Solenoid, A/T > Component Information > Diagrams > Diagram Information and Instructions > Page 4679

[PREV PAGE] [NEXT PAGE]