Savana 3500 V8-4.8L (2009)
1. Install the wiring harness and TCC solenoid assembly (66) with a new O-ring seal to the transmission.
2. Install the pass-through electrical connector to the transmission case.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the valve body bolts which retain the internal wiring harness and install the TCC solenoid retaining bolts.
1. Tighten the control valve body retaining bolts to 11 Nm (97 lb in).
2. Tighten the TCC solenoid retaining bolts to 11 Nm (97 lb in).