Savana 3500 V8-4.8L (2009)
14. Lower the vehicle.
15. Remove the shift cable from the vehicle.
Installation Procedure
Important: Prior to installing the shift cable to the vehicle, ensure that the column shift lever and the transmission control lever are in
the mechanical park position. The transmission control lever can be positioned to mechanical park by rotating the control lever clockwise
until it reaches its full clockwise position.
1. Install the shift cable to the vehicle.
2. Raise the vehicle.
3. Remove the black shipping tab from the transmission end of the shift cable and discard the tab.
4. Install the ball stud on the transmission.
5. Install the shift cable to the transmission bracket.
6. Install the cable clip.
7. Install the shift cable end to the transmission shift control lever by pushing the cable end onto the transmission shift control lever stud ball.
8. Lock the primary lock.
9. Lock the secondary lock.
10. Install the shift cable clips to the engine brackets.
11. Lower the vehicle.
