Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Linkage, A/T > Shift Cable, A/T > Component Information > Service and Repair > 4L60-E/4L65-E/4L70-E - Automatic Transmission > Page 5171

Page 4
background image

1. Install the transmission range selector cable bracket to the vehicle.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the transmission range selector cable bracket bolts (1) and tighten to 25 Nm (18 lb ft).
3. Install the transmission range selector cable to the bracket (2) and the lever. Refer to Range Selector Lever Cable Replacement   (See:

4L60-E/4L65-E/4L70-E - Automatic Transmission/Range Selector Lever Cable Replacement).

4. Lower the vehicle.
5. Check the vehicle for proper operation. If adjustment of the cable is necessary, refer to Range Selector Lever Cable Adjustment   (See:

Adjustments).

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Linkage, A/T > Shift Cable, A/T > Component Information > Service and Repair > 4L60-E/4L65-E/4L70-E - Automatic Transmission > Page 5171

[PREV PAGE] [NEXT PAGE]