Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Solenoid, A/T > Component Information > Diagrams > Diagram Information and Instructions > Page 5109

Page 93
background image

Note:  Always use care when removing a terminal position assurance (TPA) in order to avoid damaging it.

5. Release the TPA by inserting a small flat-blade tool into the blue locking tabs on both ends of the connector. Gently slide the TPA up to the

released position on both ends.

6. For the larger terminals insert the J 38125-13A tool to release the terminals by inserting the tool into the terminal release cavity. For the smaller

terminals insert the J 38125-12A tool to release the terminals by inserting the tool into the terminal release cavity. See the release tool cross
reference in the Reference Guide of the J-38125   to ensure that the correct release tool is used.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Solenoid, A/T > Component Information > Diagrams > Diagram Information and Instructions > Page 5109

[PREV PAGE] [NEXT PAGE]