Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Solenoid, A/T > Component Information > Diagrams > Page 5147

Page 1
background image

Shift Solenoid: Service and Repair

Control and Shift Solenoids Replacement

Removal Procedure

1. Remove the transmission oil pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement   (See: Service and Repair/Removal

and Replacement).

Note:  Do not remove the valve body for the following procedures. Removal of the 1-2 accumulator is necessary only if servicing the pressure
control solenoid.

2. Remove the 1-2 accumulator if necessary. Refer to Accumulator Assembly, Spacer Plate, and Gaskets   (See: Accumulator/Service and

Repair/4L60-E/4L65-E/4L70-E - Automatic Transmission).

3. Disconnect all the internal wiring harness electrical connectors from the electrical components (1-6).

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Solenoid, A/T > Component Information > Diagrams > Page 5147

[PREV PAGE] [NEXT PAGE]