GMC Workshop Manuals
Savana 3500 V8-4.8L (2009)
Transmission and Drivetrain > Automatic Transmission/Transaxle > Torque Converter Clutch Solenoid, A/T > Component Information > Diagrams > Diagram Information and Instructions > Page 5289
5. The terminal positive assurance (TPA) is located in the front and rear of the connector.
Note: The front TPA cannot be removed from the connector. Only move it to the preset position.
6. Use a small flat-blade tool to move the front TPA to the preset position, outboard approximately 0.125 in. (3 mm).
7. Use a small flat-blade tool to completely remove the rear TPA from the connector.
|[PREV PAGE] [NEXT PAGE]|