Savana 3500 V8-4.8L (2009)
3. If replacing the lower differential carrier assembly bushing, remove the bushing by performing the following steps:
1. Install the J 45850-2 (2), the J 45850-3 (1), the forcing screw, the thrust bearing, and the nuts (3) over the differential carrier assembly bushing
as shown.
2. Remove the lower differential carrier assembly bushing by holding the upper nut and tightening the lower nut of the J 45850 .
Installation Procedure
1. If replacing the lower differential carrier assembly bushing, install the bushing by performing the following steps:
1. Install the differential carrier assembly bushing into the differential carrier assembly bushing bore.
2. Install the J 45850-2 (3), the J 45850-3 (2), the forcing screw, the thrust bearing, and the nuts (1, 4-5) over the differential carrier assembly
bushing as shown.
3. Install the lower differential carrier assembly bushing by holding the upper nut and tightening the lower nut of the J 45850 .