Savana 3500 V8-4.8L (2009)
5. Using the J 22912-B - Split
Plate Bearing Installer and a press, remove the bearing from the drive pinion.
6. Remove the selective pinion shim.
Note: Move the drift back and forth between one side of the cup and the other in order to work the cups out of the housing evenly.
7. Using a hammer and a brass drift in the slots provided, remove the outer pinion bearing cup from the axle housing.
Note: Move the drift back and forth between one side of the cup and the other in order to work the cups out of the housing evenly
