Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Transmission and Drivetrain > Differential Assembly > Pinion Flange, Differential > Component Information > Service and Repair > Drive Pinion Flange/Yoke and/or Oil Seal Replacement (8.6, 9.5 Inch Axles) > Page 5519

Page 2
background image

7. Support the propeller shaft and move out of the way as necessary.

8. Measure the torque required in order to rotate the pinion. Use an inch-pound torque wrench. Record the torque value for reassembly. This will

give the combined preload for the following components:

*

The pinion bearings

*

The pinion seal

*

The carrier bearings

*

The axle bearings

*

The axle seals

Transmission and Drivetrain > Differential Assembly > Pinion Flange, Differential > Component Information > Service and Repair > Drive Pinion Flange/Yoke and/or Oil Seal Replacement (8.6, 9.5 Inch Axles) > Page 5519

[PREV PAGE] [NEXT PAGE]