Savana 3500 V8-4.8L (2009)
2. Using a pair of pliers, remove the retaining ring (2) from the yoke (1).
3. With the aide of an assistant, support the propeller shaft so that it level with the press.
4. Using the appropriate size socket (2), support the universal joint opposite of the J-9522-3 - U-Joint Bearing Separator.
5. Using the J-9522-3 - Separator (1) and the press, remove the universal bearing from the yoke.
6. If you are unable to completely remove the universal bearing with the J-9522-3 - Separator , proceed to step 7.