gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Wheel Drive Shaft Inner Joint and Boot Replacement|Page 5613 > < Wheel Drive Shaft Inner Joint and Boot Replacement|Page 5611

Savana 3500 V8-4.8L (2009)

Page 3
background image

1. Slide the new clamps (4, 7) on the tripot seal (6).
2. Install the tripot seal (6) over the wheel drive shaft.
3. Install the tripot bushing (5) into the seal.
4. Slide the spider assembly onto the wheel drive shaft.

5. Install the new spider snap ring (2) with the J 8059   or equivalent.

Wheel Drive Shaft Inner Joint and Boot Replacement|Page 5613 > < Wheel Drive Shaft Inner Joint and Boot Replacement|Page 5611