Savana 3500 V8-4.8L (2009)
2. Remove the windshield side garnish molding by inserting your fingers between the top of the garnish molding and the headliner. Pull gently to
release the clip as shown.
3. With the tether clip open and attached to the body, disengage the clip from the garnish molding.
4. Slide the garnish molding upward to release the molding from the top of the instrument panel.
5. Remove the molding from the vehicle.
6. Depress the tab holding the tether to the metal retainer and remove the tether.
7. Grip the metal retainer with a pair of needle nose pliers as shown.
8. Using a small screwdriver in the hole in the clip, release the inner tab on the metal retainer.
