Savana 3500 V8-6.6L DSL Turbo VIN 2 (2006)
35. Remove the tape from the turbocharger openings.
IMPORTANT: Lubricate the end of the duct prior to installation.
36. Install the charged air cooler inlet duct connector (4) to the turbocharger.
37. Tighten the charged air cooler inlet duct connector to turbocharger clamp (1).
Tighten the clamp to 6 N.m (53 lb in).
38. Install the charged air cooler outlet duct to the intake.
IMPORTANT: Lubricate the end of the duct prior to installation.
39. Tighten the charged air cooler outlet duct to intake hose clamp.
Tighten the clamp to 6 N.m (53 lb in).
40. Install the air cleaner outlet duct.
41. Install both front wheelhouse panels.
42. Install the engine cover.
43. Connect the negative battery cable.
