Savana 3500 V8-6.6L DSL Turbo VIN 6 (2007)
Tighten the bolts to 10 N.m (89 lb in).
5. Connect the positive battery cable (1) to the glow plug control module.
6. Connect the engine wiring harness electrical connector (1) to the glow plug control module.
7. Install the charged air cooler inlet hose/pipe assembly.
8. Connect the negative battery cable.
9. If a NEW glow plug control module was installed, program the module. Refer to Control Module References. See: Testing and
Inspection/Programming and Relearning
10. Install the engine cover.
