Savana 4500 V8-6.6L DSL Turbo (2009)
Variable Valve Timing Actuator: Service and Repair
Camshaft Position Sensor Exciter Ring Replacement
Removal Procedure
1. Remove the engine front cover. Refer to Engine Front Cover Replacement (See: Timing Components/Timing Cover/Service and Repair).
Caution: Do not use an impact driver to remove or install the oil pump driven gear nut. Use of an impact driver may shear the oil pump drive
gear pin in the crankshaft.
2. While holding the secondary oil pump shaft with a hex driver, remove the oil pump driven gear nut.
3. Remove the oil pump driven gear.
Note: DO NOT remove the reluctor from the oil pump drive gear. The reluctor is timed to the gear and once removed the correct timing will be
lost.
4. Remove the oil pump drive gear and crankshaft sensor reluctor.
