Savana 4500 V8-6.6L DSL Turbo (2009)
Fuel Temperature Sensor: Service and Repair
Fuel Temperature Sensor Replacement
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
2. Remove the charged air inlet tube. Refer to Charged Air Cooler Hoses/Pipes Replacement (Inlet) (See: Turbocharger/Intercooler/Intercooler
Duct/Service and Repair/Charged Air Cooler Hoses/Pipes Replacement (Inlet))Charged Air Cooler Hoses/Pipes Replacement (Outlet) (See:
Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charged Air Cooler Hoses/Pipes Replacement (Outlet)).
3. Remove the rear fuel line retainer and bolt.
4. Remove the fuel line retainer at center of engine.
5. Remove the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (See: Glow Plug System/Glow Plug Control
Module/Service and Repair).
6. Disconnect the fuel rail temperature (FRT) sensor electrical connector.
