Sierra 1500 2WD V6-4.3L VIN X (2004)
![background image](/gmc/sierra_1500_2wd/v6-4.3l_vin_x/Page-1004004.png)
10. Remove the CMP sensor.
INSTALLATION PROCEDURE
IMPORTANT: Do not use the old cap, CMP sensor, and rotor screws. Use the replacement screws that have been coated with a threadlock
compound.
1. Insert the CMP sensor in the reluctor wheel slot.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install NEW CMP screws.
Tighten
Tighten the screws to 2.2 N.m (19 lb in).