Sierra 1500 2WD V8-5.3L (2008)
Sunroof / Moonroof Panel: Adjustments
Sunroof Window Height and Opening Fit Adjustment
1. Open the sunshade.
2. Close the sunroof window.
3. Loosen the adjusting screws on each side of the sunroof window.
*
Crew Cab has two screws.
*
Extended Cab has three screws.
4. Adjust the corners of the window panel using the following guidelines:
*
Adjust the front of the sunroof window flush to 2 mm (0.08 in) below the top surface of the roof panel.
*
Adjust the rear of the sunroof window flush to 2 mm (0.08 in) above the top surface of the roof panel.
Notice: Refer to Fastener Notice.
5. Install the sunroof window adjustment screws.
Tighten the screws to 4 N.m (35 lb in).
*
Crew Cab has two screws.
*
Extended Cab has three screws.