Sierra 1500 2WD V8-5.3L (2008)
6. Position a piece of wood across the piston to be installed.
7. Applying equal pressure by hand while pushing down, install the piston in the bore.
8. Remove the piece of wood.
Notice: Refer to Fastener Notice .
9. Install the bleeder valve in the brake caliper housing.
Tighten the bleeder valve to 12 N.m (106 lb in).
10. Install the bleeder valve cap.
11. Install the brake caliper. Refer to Front Brake Caliper Replacement (JH6, JH7) (See: Removal and Replacement/Front Brake Caliper
Replacement (JH6, JH7))Front Brake Caliper Replacement (JD9, JF3, JF7) (See: Removal and Replacement/Front Brake Caliper Replacement
(JD9, JF3, JF7)) .
Rear Brake Caliper Overhaul (JH6, JH7)