Sierra 1500 2WD V8-5.3L (2008)
-
Confirm that the vehicle responds with the appropriate lock and unlock function.
-
If Yes , the 2-way transmitter was in mode B.
-
Press and release the left side button twice within one second. The 2-way transmitter should enter second vehicle mode.
-
Use the "next available slot" method in the scan tool to program the 2-way transmitter to the 2-way RCDLR. Refer to Remote Control Door
Lock Transmitter Programming in SI.
-
Both vehicle modes of the 2-way transmitter should now be coded to the vehicle.
If No:
The 2-way transmitter is not exhibiting the failure mode addressed by this bulletin. Refer to normal diagnostic procedures.
Parts Information
For part numbers, usage and availability of 2-way remote start, refer to the Accessory Parts Catalog or Corporate Bulletin Number 09-00-89-025A.
Disclaimer