Sierra 1500 2WD V8-5.3L (2008)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Removal Procedure
1. Move the instrument panel to the service position. Refer to Instrument Panel Service Positioning (Without SLT) Instrument Panel Service
Positioning (With SLT) .
2. Disconnect the clutch pedal engine start switch electrical connector (1).
3. Remove the clutch master cylinder. Refer to Clutch Master Cylinder Replacement (See: Clutch Hydraulic System/Clutch Master Cylinder/Service
and Repair) .
4. Remove the clutch pedal to clutch pedal bracket bolt .
5. Remove the clutch pedal to brake module bolts.
6. Remove the clutch pedal sub-assembly.
Installation Procedure