Sierra 1500 2WD V8-5.3L VIN B HO (2006)
5. Install the pressure control solenoid retainer (378) and retainer bolt (364A).
^
Tighten the bolt to 11 Nm (97 inch lbs.).
6. Install the TCC PWM solenoid to the control valve body.
7. Install the TCC PWM solenoid retainer.
8. Connect the internal wiring harness electrical connectors to the following components:
^
Transmission fluid pressure switch (1)
^
1-2 shift control solenoid (2)
^
2-3 shift control solenoid (3)
^
Pressure control solenoid (4)
^
TCC PWM solenoid (5)
^
3-2 control solenoid (6)
9. Install the 1-2 accumulator.
10. Connect the transmission harness 20-way connector (1) to the transmission pass-through connector. Align the arrows on each half of the connector
and insert straight down.
11. Install the transmission filter.