Sierra 1500 2WD V8-5.3L VIN Z Flex Fuel (2006)
3. Remove the quarter panel trim screws.
4. Remove the lower seat belt anchor bolt in order to guide the seat belt through the trim panel.
5. Remove the quarter panel.
INSTALLATION PROCEDURE
1. Install the seat belt through the trim panel.
2. Install the quarter panel.
3. Install the lower seat belt anchor bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 53 N.m (39 lb ft).
4. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
5. Install the rear window lower molding.
6. Install the coat hook, if removed.
Trim Panel Replacement - Rear Quarter (Extended Cab)
TRIM PANEL REPLACEMENT - REAR QUARTER (EXTENDED CAB)
REMOVAL PROCEDURE
1. Remove the rear seat, if necessary.
2. Remove the rear window molding.
3. Remove the armrest screw.