Sierra 1500 2WD V8-5.3L VIN Z Flex Fuel (2006)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
Caution: Refer to SIR Caution in Service Precautions.
2. Remove the body control module (BCM).
3. Put the shift lever clevis into the neutral position.
4. Disconnect the electrical connector.
5. Using a small screwdriver, pry the automatic transmission shift lock control actuator away from the steering column jacket and the cable shift cam.
6. Remove the shift lock control actuator.
Installation Procedure